Effects of Hydrogen on Materials 2008 with CD, Proceedings of the International Hydrogen Conference,

Title: Effects of Hydrogen on Materials 2008 with CD, Proceedings of the International Hydrogen Conference,
Author: Brian Somerday, Petros Sofronis, Russell Jones
ISBN: 1615030034 / 9781615030033
Format: Hard Cover
Pages: 800
Publisher: ASM International
Year: 2009
Availability: Out of Stock

Tab Article

Research and commercial activity in developing hydrogen as a fuel is driving increased attention on hydrogen-materials interactions. In particular, a renewed and intensifying interest in developing hydrogen fuel cells has prompted extensive research with the objective to enable the safe design of components for transporting and storing hydrogen fuel. This volume is the proceedings from the premier conference on hydrogen effects in materials, bridging scientific research and engineering applications. The proceedings volume highlights several themes: the technological importance of hydrogen effects on structural materials; the impact of bridging science and engineering; and the opportunity to apply new research tools, including simulation techniques as well as experimental methods.
 

Tab Article

Preface

Section 1 : Keynote Speaker Session
Science-Based Prognosis to Manage Structural Alloy Performance in Hydrogen
Revealing The Fundamental Processes Controlling Hydrogen Embrittlement

Section 2 : Hydrogen Effects on Mechanical Properties
A Coexistent View of Hydrogen Effects on Mechanical Behavior of Crystals : HELP and HEDE
Recent Observation of Hydrogen-Induced Cracking of High-Strength Steels
Hydrogen Embrittlement of High Strength Steels and Environmental Hydrogen Entry
Effect of Hydrogen of The Mechanical Properties of Multiphase High Strength Steels
Mixed-Mode Hydrogen Assisted Cracking in Progressively Drawn Pearlitic Steels
Hydrogen Effects on The Plasticity of FCC Nickel and Austenitic Alloys
Hydrogen-Assisted Fracture of Austenitic Stainless Steels
Effect of Hydrogen on Plastic Strain Localization in Single Crystals of Nickel and Austenitic Stainless Steel
Influence of Hydrogen and Prestrain on Tensile Properties of Type 316L Austenitic Stainless Steel
Effect of Crack-Tip Hydrogen Profiles on The Embrittled Fracture Toughness of A Stainless Steel
Hydrogen-Induced Cracking of Metastable Austenitic Stainless and High-Strength Carbon Steels
Hydrogen-Induced Fatigue Crack Growth Acceleration and Martensitic Transformation of an Austenitic Stainless Steel
Effect of Internal Hydrogen on Fatigue Strength of Type 316 Stainless Steel
Hydrogen-Assisted Fracture of Welded AISI 316 Austenitic Stainless Steel
The Role of Hydrogen Induced Microstructural Changes in The Embrittlement of Austenitic-Ferritic Steel
Hydrogen-Induced ƒÃ-Martensite and Hydrogen Embrittlement of Austenitic Steels
Hydrogen Effects on Strain-Induced Martensite Formation in Type 304L Stainless Steel
Orientation Specific Mechanical Assessment of Hydrogen Precharged Stainless Steels Using Nanoindentaion
In Situ Electrochemical Nanoindentation : A Nanomechanical Approach to Rank Hydrogen Embrittlement in Extremely Small Volumes
Lattice Defect Formation and Degradation Enhanced by Hydrogen and Strain of Metals
Effect of Hydrogen on Microscopic Deformation Process Near Stage II Fatigue Crack Tip
Characterization of Hydrogen-Assisted Fracture Mechanism by Fracture Surface Topography Analysis (FRASTA)
The Influence of Hydrogen on The Elastic Modulus and Anelastic Response of Cold Worked Pure Iron
Improving The Fatigue Properties of Metastable Beta Titanium Alloys by Thermohydrogen Processing
Study of Hydrogen Treatment for Improving Strength and Plasticity of Ti-6AI-4V Alloy

Section 3 : Hydrogen from Aqueous Environments
Stress-Corrosion Cracking of AI-Zn-Mg-Cu Alloys Effects of Composition and Heat-Treatment
Stress Corrosion Cracking Behaviour of Alloy 7050-T7451 Plate in an Aqueous Chloride-Nitrate Solution
The Role of Hydrogen in The Stress Corrosion Cracking of Mg-AI Alloys
Microstructural Effects on The Stress Corrosion Cracking Response of an Alloy 600
Hydrogen Sour Environments Conditions for Microalloyed Pipeline Steels Cracking
Analytical Methods for Studying Cathodic Hydrogen Charging into Metals under Competitive Adsorption Conditions
The Impact of Dislocation Distribution on Hydrogen Evolution Reaction on Nickel Metal in Sulphuric Acid
Cathodic Hydrogenation of Very High Strength Steels-Influence of Arsenic as A Hydrogenation Promoter

Section 4 : Structural Design and Materials for Hydrogen Service
Structural Materials Issues in The Development of The Hydrogen Energy Infrastructure in Japan
Hydrogen Delivery : Infrastructure, Challenges, and Materials Needs
Recent Progress of Research and Development for fuel Cell Vehicle Application
Metallurgical Considerations for Commercial Steels Used for Hydrogen Service
Sustained Load Cracking of Steels for Hydrogen Storage and Delivery
Tensile and Fracture Properties of Carbon and Low Alloy Steels in High Pressure Hydrogen
Damage under High-Pressure Hydrogen Environment of A High Strength Pipeline Steel X80
Effects of Hydrogen and Prestrain on Tensile Properties of Low-Carbon Steel Used in Hydrogen Pipelines
The Effect of Residual Hydrogen on High-Cycle Fatigue Property of welded Joints for Gas Pipeline Steel
Hydrogen Effects on Fatigue Crack Growth Rate in High Strength Pipeline Steel
Blister Fracture of Rubbers for O-Ring Exposed to High Pressure Hydrogen Gas
A Study on Blister Damages of Rubber O-Ring by High Pressure Hydrogen Durability Tester
Friction and Wear of Metals and Coatings Used in Hydrogen
Residual Stress Relaxation in Shot-Peened High Strength Low Alloy Steel and Its Implications for Hydrogen Assisted Cracking
Determination of Stainless Steels Mechanical Properties in High-Pressure Hydrogen

Section 5 : Hydrogen Uptake, Transport, and Trapping
Quantitative Analysis of Hydrogen Isotopes in The Near Surface Region of Solids
Hydrogen Trapping Mechanisms in Structural Materials
Nano-Precipitates Design with Hydrogen Trapping Character in High Strength Steels
Hydrogen Trapping Character of Nano-Sized NBC Precipitates in Tempered Martensite
Hydrogen Trapping at Dislocations in Palladium at Low Temperature : Results from Inelastic Neutron Scattering and Advanced Computations
Comparing Thermal Desorption Spectroscopy with Electrochemical Permeation in Order to Reveal The Hydrogen Management in High Strength Steels
Experimental Evaluation of The Hydrogen Distribution in Steel by Thermal Desorption Spectroscopy
Identification of The Hydrogen Trap Sites in A High Strength TRIP Steel by Means of Thermal Desorption Spectroscopy
Determination of Diffusible Hydrogen Content in Coated High-Strength Steel
Hydrogen Distribution in Stressed Super Alloys A Tritium Autoradiography Investigation
Hydrogen Diffusion in 9Cr Steel : Effect of Microstructure
Surface Effects during Hydrogen Permeation in Pd-Plated and Ni-Plated Iron Membranes
Non-Destructive Determination of The Diffusion Coefficient of Hydrogen in Steel
Hydrogen Penetration Behavior of High Strength Low Alloy Steel with Plastic Deformation in Gaseous Hydrogen
Magnetocorrosion of Pipeline Steel
Hydrogen Interactions with Titanium Thin Films
Corrosion of Uranium by Hydrogen at Low Hydrogen Pressures

Section 6 : Continuum Modeling and Simulation
Crack-Tip Hydrogen Accumulation in Metals under Transient Loading
Sensitivity to Temperature and Material Properties of Hydrogen Concentration at A Crack Tip In Austenitic Stainless Steel
Finite Element Analysis of Hydrogen Diffusion in Materials
Modeling of Hydrogen Assisted Cold Cracking in High Strength Steel Welds
Influence of Drawing-Induced Residual Stresses and Strains on Hydrogen Embrittlement of Cold Drawn Wires
Cohesive Zone Model for Hydrogen Embrittlement of Grain Boundaries in AI 5xxx Alloys
Modeling Issues on Hydrogen-Induced Intergranular Cracking under Sustained Load
Hydrogen Induced Stress Cracking in 25% Cr Duplex Stainless Steel Simulated by Cohesive Zone Modelling

Section 7 : Atomistic Modeling and Simulation
First-Principles Prediction of Hydride Phase Stability and The Thermodynamics of Decohesion
Modeling The Plastic Zone Ahead of A Crack by Two Dimensional Discrete Dislocation Dynamics
Multi-Scale Simulation of Crack Tip Shielding : Constrained Molecular Dynamics and Elastic Calculations
Atomistic Study of Hydrogen Diffusion around Dislocations in Alpha Iron
Estimation of Hydrogen Distribution around Dislocations Based on First Principles Calculations
Monte Carlo Simulation of Vacancies at AI-‡”=33(554)[1-10] : Towards Intergranular Superabundant Vacancies
Effects of The Density of States on The Stacking Fault Energy and Hydrogen Embrittlement of Transition Metals and Alloys

Section 8 : Hydrogen Isotopes and Helium in Materials
Physics of He Platelets in Metal Tritides
Transmission Electron Microscopy Study of Helium-Bearing Fusion Welds
Synergistic Effects between Hydrogen and/or Helium Accumulation and Ion Irradiation Damage in Nuclear Related Materials
Adhesion and Fracture of Scandium Deuteride Films
D Loss as A Function of Temperature in ErD2 Films on Kovar with and without an Intermediate Mo Diffusion Barrier
Tritium Effects on Dynamic Mechanical Properties of Polymeric Materials
Studies of Hydrogen Isotopes Superpermeation through Membranes of Group V Metals on gPrometheush Setup

Author Index
Subject Index